SFF Specifications
The following database provides access to SFF TWG published and draft documents. The following explains the fields of the database.
Date - The date on the latest version of the SFF document. If the document is published and there is no new draft available, this will be the date on the published document. If there is a new draft available, this date will represent the date of the latest draft.
ID - The document ID.
Title -The title of the document.
Status - Reflects the following for the most recent version of the document:
- Published - Documents that have been completed and approved for publication. The revision number listed for the published document will be linked to a copy of the latest published revision of the document.
- Draft - Draft documents that have been made available for public review and comment. The revision number listed for the draft will be linked to a copy of the latest draft.
- Expired - Documents that are no longer maintained by the SFF TWG. Expired documents contain a cover page providing the reason for being expired (i.e., superseded, canceled, voided, obsolete, other).
- New Project Initiated - This indicates that a new project has been initiated and no draft is available yet, either for a new document or a new revision to an existing previously published document. When possible, this may be linked to a copy of the New Project Proposal slides.
Feedback on any document may be made through the SNIA Feedback portal at https://www.snia.org/feedback.
See the letter from the SNIA Secretary for additional details regarding disclosures, including how to make a disclosure.
Non-feedback questions should be submitted by e-mail to tcadmin@snia.org.
| Date | ID | Title | Status |
|---|---|---|---|
| SFF-8146 | Serial ATA Connector Position in the 54x71mm Drive form factor | Published 1 | |
| SFF-8552 | Form Factor of 5 1/4" 9.5mm and 12.7mm Height Optical Drives | Published 1.4 | |
| SFF-8434 | SFP+ Gerber Files | Published 0 | |
| SFF-8067 | 40-pin SCA-2 Connector w/Bidirectional ESI | Published 3.6 | |
| SFF-8142 | Parallel ATA Connector Position in the 54x71mm Drive form factor | Published 1.4 | |
| SFF-8454 | SCA-2 Enhanced HSS Signals | Published 1.5 | |
| SFF-8143 | CE-ATA x4 & x8 Connector Position in the 54x71mm Drive form factor | Published 1.4 | |
| SFF-8141 | 54x71mm Drive form factor | Published 1.5 | |
| SFF-8414 | HPEI Passive Cable Assembly and PCB S-Parameter Measurements | Published 10.1 | |
| SFF-8437 | Small Formfactor Pin Through Hole Transceivers | Published 1.1 | |
| INF-8438 | QSFP (Quad Small Formfactor Pluggable) Transceiver | Published 1 | |
| SFF-8470 | Shielded High Speed Serial Multilane Copper Connector | Published 3.3 | |
| SFF-8131 | 30x40mm Drive form factor | Published 1.9 | |
| SFF-8484 | Multilane Unshielded Serial Attachment Connectors | Published 2 | |
| SFF-8485 | Serial GPIO (SGPIO) Bus | Published 0.7 | |
| SFF-8421 | HSSDC-2 Shielded Connections | Published 2.7 | |
| INF-8077 | 10 Gigabit Small Form Factor Pluggable Module | Published 4.5 | |
| SFF-8132 | 35 Pin Parallel ATA Connector in the 30x40mm Form Factor | Published 1.3 | |
| SFF-8415 | HPEI Measurement Methodology and Signal Integrity Requirements | Published 8.2 | |
| SFF-8429 | Signal Specification Architecture for HSS Links | Published 1.1 |